Application of apophyllite and thomsonite natural zeolite as modified adsorbents for the removal of zinc from acid mine drainage.

Materials composed of natural zeolite have the potential to serve as highly effective adsorbents in the treatment of wastewater. The present study explores zeolite resin-based Apophyllite and Thomsonite as adsorbents for removing Zinc from acid mine drainage solution. The characteristics of the natural zeolites (Apophyllites and Thomsonite) are investigated using X-ray diffraction, Fourier-transform infrared spectroscopy and Field emission scanning electron microscopy analysis. The removal of Zinc from AMD is explored, and the influence of metal ion concentration, resin dose, and pH is investigated using a batch exchange resin-based experimental method. Maximum zinc removal occurs in the pH range of 2-6 with an initial zinc content of 50-250 mg/L and a resin dosage of 25-700 mg/L, indicating that the adsorption process is pH-dependent. Various isotherm models, including those proposed by Freundlich and Langmuir as well as Redlich-Peterson, Dubinin, and Temkin, are used to verify the results of the experimental research. All these isotherm models' constants are determined. Both resins showed different sorption efficiencies at different operating conditions. However, highest Zn removal efficiency of 86.2% was observed for the Thomsonite zeolite resin whereas Apophyllite zeolite resin showed maximum Zn uptake of 81.6%. Thus, Thomsonite was found to be an effective sorbent.

Ionic Strength and Hybridization Position near Gold Electrodes Can Significantly Improve Kinetics in DNA-Based Electrochemical Sensors.

A variety of electrochemical (EC) biosensors play critical roles in disease diagnostics. More recently, DNA-based EC sensors have been established as promising for detecting a wide range of analyte classes. Since most of these sensors rely on the high specificity of DNA hybridization for analyte binding or structural control, it is crucial to understand the kinetics of hybridization at the electrode surface. In this work, we have used methylene blue-labeled DNA strands to monitor the kinetics of DNA hybridization at the electrode surface with square-wave voltammetry. By varying the position of the double-stranded DNA segment relative to the electrode surface as well as the bulk solution's ionic strength (0.125-1.00 M), we observed significant interferences with DNA hybridization closer to the surface, with more substantial interference at lower ionic strength. As a demonstration of the effect, toehold-mediated strand displacement reactions were slowed and diminished close to the surface, while strategic placement of the DNA binding site improved reaction rates and yields. This work manifests that both the salt concentration and DNA hybridization site relative to the electrode are important factors to consider when designing DNA-based EC sensors that measure hybridization directly at the electrode surface.

2D materials: increscent quantum flatland with immense potential for applications.

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO2 reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Nickel Cobaltite Nanoplate-Based Electrochemical Sensing Platform from Printable Inks for Simultaneous Detection of Dopamine and Uric Acid.

2D metal oxide-based nanomaterials have emerged as an exciting area of research owing to their rich electrochemical properties and diverse applications, including biosensors. In this work, we have synthesized ultra-thin Co3 O4 , NiO, and NiCo2 O4 nanostructures supported on a carbon cloth and printed graphite/Kapton substrates following thermal reduction of self-assembled metal alkanethiolates. These nanostructures act as a sensing platform for simultaneous detection of dopamine (DA) and uric acid (UA), important biological molecules in physiological and pathological tests. The ultrathin 2D nanoplates of NiCo2 O4 spinel formed in this study exhibit high electrochemical activity than pristine NiO and Co3 O4 . The electrochemical characterization studies indicate that NiCo2 O4 possesses a high potential for DA and UA with a peak separation of ∼140 mV, high sensitivity, and excellent selectivity. The low-cost and disposable, single-shot probe biosensors fabricated in this work possess a wide working range of 0.001-1000 µM with detection limits of 0.33 and 0.49 nM for DA and UA, respectively, with a practically achievable limit of quantification of ∼1 nM. Multiple sensing electrodes are printed on graphite/Kapton all at once following this method with improved reproducibility for DA and UA sensing further extending the scope of work towards mass fabrication and practical usage.